Safetee is simple

Thanks for purchasing Safetee! Please watch this short how to video that contains instructions on how to apply, care for and remove a Safetee label.

Alternatively scroll down for written step by step instructions

Want to know more or have a question?

 

Did you know ? Safetees can be applied to a wide range of clothes, not just t-shirts!

Scroll down to view our aftercare and garment guide. We recommend that all garments are clean and ironed before application

Step By Step Guide

  • Step 1. Cut out

    Cut out 1 Safetee label from the sheet of labels. Use the dotted line as a guide and try not to leave any square edges as these can get caught. Fill an iron with water and switch on to half heat and heat up while you are cutting.

  • Step 2. Apply

    Choose where you want to apply the Safetee label on the garment. We recommend somewhere visible on the outside. Place the cut out down in position and lay the greaseproof paper provided over it. Do not flip the label.

  • Step 3. Iron

    With your iron heated up to half temperature, press down firmly over the design, move back and forth, ensuring all the edges are covered. Do this for 45 seconds. *If you smell burning stop and remove the heat*

  • Step 4. Done!

    Remove the iron and switch it off. Remove the greaseproof paper and set it to one side. Wait a few minutes until the area has cooled down before touching. Check to make sure it scans. if the label has not stuck, cover and re-iron

Garment Guides & Aftercare Advice

General Aftercare

We suggest to avoid washing the garment for at least 48hrs after transfer has been applied. When washing do not use bleaching or stain remover treatments, and wash at a lower temperature. Avoid tumble drying unless you wish to remove the Safetee label.

If the Safetee label begins to peel, use the grease proof paper provided and re apply heat to hold down.

 

Garment Guide

Please note that these guides are for reference only from our own tests - please check with the garment manufacture if you are unsure. Safetee does not accept responsibility for damaged garments

Heat and Timings

Standard T-Shirt - Wool / Half Heat for 45 seconds. Keep moving the iron so that no one area becomes too hot

Hoodie - Wool / Half Heat for 90 seconds. Keep moving the iron so that no one area becomes too hot

Swim Wear / Bikini / Wet suit - Nylon / Quarter Heat for 20 seconds, remove heat for ten seconds. Repeat 3 times for a total of 60 seconds heat. Stop if you smell burning

Football T-shirt / Shorts - Nylon / Half Heat for 60 seconds, remove heat and then heat again for 20 seconds

Denim - Wool / Half Heat for 45 seconds moving the iron so that no one area becomes too hot

Removal

Wet the label area with warm water, then using a nail or a blunt object such as a butter knife, carefully etch at a corner of the label until it becomes loose, then peel the whole label off slowly. Labels can also come off if tumble dried straight after washing